Eastlink flexible waste connectors are manufactured in Italy by Hydrosystem S.r.l.,
These compact extendable flexible waste connectors have female BSP nuts at one end to connect direct to the waste outlet and male spigots on the other ends. We offer both ABS spigots for solvent welding and PP spigots for pushfit jointing. either may be used with standard compression fittings.
These 4 waste connectors can be used as flexible traps and a double clip is supplied in the bag to secure the connector into a P trap shape which can then also be bent into an S trap.
They will extend from around 300mm when compressed to 720mm extended.
ECOGB36, 1¼" BSP x 36mm Solvent ABS Spigot
ECOGB43, 1½" BSP x 43mm Solvent ABS Spigot
ECOGB114, 1¼" BSP x 32mm Pushfit PP Spigot
ECOGB112, 1½" BSP x 40mm Pushfit PP Spigot
When space is limited and a change of direction required, use our SUPERFLEX 90 flexible waste connectors. These have a 90 degree FBSP bend on one end and ABS spigots on the other. The SUPERFLEX is a steel reinforced spiral.
DR9036, 1¼" 90 º FBSP x 36mm Solvent ABS Spigot
DR9043, 1½" 90º FBSP x 43mm Solvent ABS Spigot
We also offer the WFLEXGB1, a flexible reinforced PVC hose with a 36mm ABS spigot on one end and a 32mm universal compression joint on the other end. Total length is approx 600mm.
